1
/
of
4
LINK 350Z Plug&Play XtremeX
LINK 350Z Plug&Play XtremeX
Regular price
$1,844,999 CLP
Regular price
$2,049,999 CLP
Sale price
$1,844,999 CLP
Unit price
/
per
Shipping calculated at checkout.
📦 International shipping. Shipping costs are calculated automatically at checkout based on your address.
Couldn't load pickup availability
SHARE WITH A FRIEND
SKU: 210-4000
General details:
Compatible models:
2002 to 2006 Nissan 350Z (Fairlady Z Z33)
2003 to 2006 Nissan Skyline V35
2003 to 2006 Infinity G35
- Built-in 4-bar MAP sensor
- This ECU works with manual and automatic 350Z models
- Cruise control and most original vehicle functions remain operational.
- Precise, consistent electronic throttle control, equivalent to the original ECU
- Mapping: SPEED DENSITY (volumetric efficiency (VE) model) or Alpha-N (TPS)
- Designed for the VQ35DE engine
- Supports up to 4 variable camshafts
- Advanced CLOSED-LOOP boost control (up to 3 switchable tables)
- Launch control and dedicated anti-lag strategy
- MINI USB communication
- Electrical protection on all inputs and outputs
- Knock sensor input
- Knock control with detection windowing
- "TORQUE MANAGEMENT (torque delivery control)
Processor
- 150 MHz microprocessor designed for motorsport
- Ignition timing resolution of 0.1 degrees and fuel resolution down to 0.01 ms
- 32 Bit Floating Point Calculation
- 12 Bit ADC Resolution
- 20000+ RPM
- 4Gb Non Volatile Flash
Inputs and outputs:
- Both original oxygen sensors connected and working
- Supports dual injector rails
- Precise outputs for 2 or 4 variable camshafts, independently configurable
- OEM idle hardware supported
- Gear shift compensation through ignition, boost and fuel
Advanced functions:
Traction control
- Disable switch
- Multiple arming conditions
- Multiple 3D slip Threshold tables
- Traction control manages tire slip to improve vehicle safety and handling
- Torque delivery can be managed using the Torque Management function
Programmable mathematical processing
- Eight individually configurable math channels with up to four parameters each.
- Math channels can be used as table axes and as digital or analog inputs.
Boost Control
- Engine temperature correction
- IAT correction
- Multiple boost tables
- External adjustment
- Open- and closed-loop options
Idle valve control
- Reliable, precise, user-configurable closed-loop idle valve control.
- Air conditioning, engine fan, power steering and idle
- Ignition timing control
Engine position sensors:
- Digital Trigger Decoding
- Reluctor, Optical Proximity or Hall Sensors
- Programmable filtering and arming thresholds (filters and pull-ups)
- Configurable trigger patterns or preset triggering options.
- Supports most OEM trigger configurations.
Motorsport (in English)
- Anti Lag
- Launch control
- Gear Shift Control (Digital Inputs, Gear Lever Force or Gear Barrel Position)
Anti-Lag System
- Dual 3D Fuel enrichment, Ignition cut and Ignition retard Tables
- Optional Cyclic idle (normal and cool-down)
- Optional 3D Idle controller Override Tables (one for Antilag and one for Cyclic Idle)
- Lockout condiitons based on engine speed and throttle position with hysteresis
Launch Control
- Single RPM, 3D RPM Table or Latched (RPM when button pressed) Launch modes
- Progressive cut control
- Selectable fuel or ignition limiting
- Selectable cut effect (adaptive or constant)
- Adjustable control range
- Vehicle speed controlled
- Ignition Trim with optional 3D table and relative or absolute ignition angle options
- Optional 3D Fuel Trim table
Gear Shift Control
- Digital input (clutch switch), gear lever force (sequential gearbox), gear lever force (H pattern gearbox), and gear barrel position sensor input options
- Timed or controlled modes
- Adjustable progressive cut levels
- Power re-introduction control
- Ignition retard control
- Fuel enrichment control
- Cut duration based on gear
Idle Control
- Solenoid, Stepper or EThrottle Control
- Open or Closed loop actuator control and Closed loop Ignition control available
- Large variety of position offsets for open loop and additional target offsets for closed loop actuator control
- Specific start-up offsets and hold times
- Dashpot functionality to smooth re-entry into idle and prevent undershoot
Electronic Throttle Control
-
- Supports external controllers
- Multiple 3D target tables
Knock Control
- 2 Built in Knock inputs
- Fuel Enrichment and Ignition Retard functionality
- Adjustable frequency filter
- Adjustable gain (per cylinder)
- Individual cylinder detection
- Individual cylinder ignition retard and fuel enrich
- Adjustable detection angle (start/end)
- Noise threshold table (3D)
- Adjustable ignition retard and fuel enrich sensitivity
- Configurable ignition reintroduction and fuel enrich decay
Variable Valve Timing Control
- Up to 4 cams independent control
- Supports many OEM applications
- Closed loop control
- Multiple 3D Cam angle target tables
- Optional advanced PID control settings for advanced tuners
- Automatic function for calibrating cam angles
TUNING TABLES:
Fuel settings:
- Configurable X and Y axes
- Traditional, Modelled and Modelled Multi-Fuel Equations
- Single-Point Group, Multi-Point Group, Sequential, Semi-Sequential, Group Staged, Sequential Staged and Sequential/Multi Point Group Staged injection modes
- Asynchronous injection (can add fuel after initial injection if conditions change)
- QuickTune (automatic tuning)
- Multiple fuel tables
- 6D fuel tuning (3D fuel table + three overlaid 3D trim tables)
- Injection rate control for semi-sequential mode (wasted spark)
- Master enrichment
- Initial cranking pulse
- Pre-crank prime pulse
- Cranking enrichment
- Post-start enrichment
- Engine warm-up enrichment
- Acceleration enrichment (TPS)
- Air temperature correction
- Injector dead-time compensation
- Injector short-pulse compensation
- Injector Timing Control with Beginning / End Injection Definable
- AFR correction
- Dual closed-loop fuel correction
- Individual fuel correction
- Injection fuel cut
- Differential idle load
- Fuel temperature correction
- Barometric altitude compensation
- Injector test function
Ignition settings
- Selectable maximum ignition advance
- Configurable X and Y axes
- Spark duration
- Dwell time table with configurable X and Y axes
- Multiple ignition timing tables
- 6D fuel tuning (3D fuel table + three overlaid 3D trim tables)
- Individual cylinder correction
- Air temperature correction
- Voltage correction
- Coolant temperature correction
- OEM Compatibility
- CDI Compatibility
- TPS transient ignition retard
- Adjustable ignition retard compensation
- Ignition coil test function
