LINK Voodoo PRO G5 / Direct Injection / (IMPORT)
LINK Voodoo PRO G5 / Direct Injection / (IMPORT)
📦 International shipping. Shipping costs are calculated automatically at checkout based on your address.
Couldn't load pickup availability
SHARE WITH A FRIEND
(Special-order import only)
Full information: HERE!
With G5 Voodoo, you get a state-of-the-art ECU at a great price, backed by Link's market-leading reliability and support.
Some of the most reliable and robust ECUs on the market.
Backed by Link's limited lifetime warranty.
*Direct injection (DI) control
G5 Voodoo ECUs are a cost-effective solution for direct and port injection, using an external OEM or aftermarket DI driver box such as Link's DI-4 driver.
G5 Voodoo supports staged port injection and direct injection (DI), allowing supplementary port injectors on a DI engine to supply more fuel for your power goals or prevent carbon buildup on intake valves.
Multipurpose pins
G5 Voodoo ECUs use multipurpose pins for highly customized configurations. G5 Voodoo Pro has 4 injector/ignition/auxiliary pins, while NEO uses analog/digital input/output (ADIO) and injector/digital input pins.
These multipurpose pins support many configurations, letting you choose the inputs and outputs required. Unused injector and ignition pins can serve as auxiliary outputs.
Built-in digital wideband lambda controllers
All G5 Voodoo ECUs have built-in wideband lambda controllers (x2), avoiding the need for CAN wideband accessories in most applications.
Dual onboard electronic throttle control (drive-by-wire)
Get faster, more precise throttle response on both banks of a V-engine with dual electronic throttle.
G5 Voodoo ECUs have fail-safe solid-state throttle relays, simplifying electronic throttle installation by eliminating external relay wiring.
Electronic throttle outputs can operate any H-bridge device, such as an electronic wastegate, allowing an electronic throttle and wastegate to run together.
Dual microcontrollers
G5 Voodoo ECUs use two microcontrollers for extra processing power: one dedicated to engine operation and one to communications.
Built-in Global Positioning System (GPS)
Link's high-frequency, high-accuracy GPS logs position, ground speed and UTC time 50 times per second using Link's sensor-fusion augmented GPS technology.
This can support driver coaching, especially when connected to an analysis tool such as MyRaceLab. It also allows functions to be configured by position, real time or GPS speed.
Link GPS can provide precise ground speed for vehicles without a speed sensor, such as race cars or boats. It can calibrate wheel speed and compare wheel and ground speeds to identify tire slip.
Dead reckoning continues calculating position when GPS lock is lost, such as in tunnels, garages or dense foliage.
Link CAN files
Create separate CAN files with additional streams and channels that can be saved, locked and shared. Flexible CAN locking hides proprietary streams, allowing files to be shared without exposing how the CAN stream was written.
In the box:
- G5 Voodoo Pro ECU
- USB-C Connection Cable
- WiFi Antenna
- 4m GPS Antenna (Magnetic or Adhesive Mount)
- USB-C and SMA Dust Covers
- QuickStart Guide (A5)
- Installer I/O table (A3)
- Link stickers
- Built-in WiFi, with real-time PC Link connection
- Built-in Global Positioning System (GPS) up to 50Hz
- Dual onboard Digital Wideband Lambda controllers
- Dual onboard E-throttle (Drive by Wire)
- 12 Injection, 8 Ignition and 4 multi-purpose (inj, ign, aux) drives (24 total)
- Dual microcontrollers
- Direct Injection (DI) on up to 12 injection drives (using an external OEM or aftermarket driver box - more info on working with DI here)
- Link CAN Files - Create your own separate CAN files with additional streams and channels, which can be saved, locked and shared
- Runs on the same highly acclaimed PC Link software as G4X, meaning you don’t need to learn a new software package. You can open both G4X and G5 log and map files in the same software (G4X Map can also be loaded into a G5 Voodoo Pro)
- Flexible mounting options - Fix to a face using the three top-down through-holes with M5 or 3/16 socket screws, or hang the ECU from a dash bar or similar using custom brackets and the four M5 side mounting points.
Requires “A”, “B” & “E” connector kits (not supplied).
